Thorny
December 31, 2000, 08:12 pm
Have an Abit BE6 M/B . Have followed the flash instructions exactly as outlined by ABIT including booting to dos with a system diskette with the two files from Abit. A:\>awdflash be6_th.bin /py /sn /cc /cd
Everything looks good during the process and I am left with a choice of F1 Reset or F10 exit. I've tried both and I still get a message on rebooting I still have the 08/24/99 bios version .
Any Ideas folks. I believe on some M/B in the past a jumper needed to be removed , but there is no mention of a jumper . This M/B has the Soft Menu II jumper system.
Am about to upgrade to a P III 800 100 mhz FSB Slot 1 . But first need to update the bios.
Thanks in advance
DC
------------------
------------------
Everything looks good during the process and I am left with a choice of F1 Reset or F10 exit. I've tried both and I still get a message on rebooting I still have the 08/24/99 bios version .
Any Ideas folks. I believe on some M/B in the past a jumper needed to be removed , but there is no mention of a jumper . This M/B has the Soft Menu II jumper system.
Am about to upgrade to a P III 800 100 mhz FSB Slot 1 . But first need to update the bios.
Thanks in advance
DC
------------------
------------------